Sonos 100 Setup Manual page 9

6
Wireless signal strength indicator. Indicates the current strength of the
Controller's wireless signal.
Battery status indicator light. Alerts you to the status of the battery charge:
• Lights red when the battery gets low, indicating that the Controller needs
charging.
• Lights amber while the Controller is charging.
• Lights green when the Controller finishes charging.
• Unlit when your Controller is in use and the battery is charged.
Battery charge indicator. Indicates the Controller's remaining battery charge.
Sleep Modes
The following settings can be adjusted by selecting System Settings→Controller
Settings from the Music menu:
Light sleep. Your Controller will go into light sleep to preserve the battery life when it is
unused for a specified period of time. The screen will turn off until motion is detected
or a button is pressed. Use the Sleep Timer Docked (when connected to power
supply) and Undocked settings to select the amount of time after which your
Controller will enter light sleep.
Deep sleep. Your Controller will go into deep sleep to preserve the battery life when it is
unused for a specified period of time. When your Controller wakes from deep sleep -
either from the motion sensor or from a button touch - it will go through a restart cycle
that takes several seconds. Select Deep Sleep Timer from the Advanced Settings
menu to select the amount of time after which your Controller will enter deep sleep.
Motion sensor. The Controller has a motion sensor to automatically wake your
Controller when motion is detected. Use the Motion Sensor setting to turn this off.
Recharging
The Sonos Controller can be recharged by plugging it into the supplied AC adapter.
The Battery Charge Indicator
charge level. When the battery charge gets very low, the Battery Status Indicator will
light red.
on your Controller displays the current battery
Sonos Controller Setup Guide