Honeywell Home RTH2410B1019 Owner's Manual page 5

5 Mount Wallplate
Mount the new wallplate using the included screws and anchors.
Drill 3/16-in. holes for drywall
Drill 3/32-in. holes for plaster
6 Connect Wires
Simply match wire labels.
If labels do not match letters on the thermostat, check "Alternate Wiring
(Conventional Systems)" on page 6 and connect to terminal as shown (see
notes, below).
INSERT WIRES
AND TIGHTEN
SCREWS
SCREW
Maximum load: 1 A @ 24 Vac, 50/60HZ per output.
We are here to help. Call 1-800-468-1502 for wiring assistance.
W/ Not
Aux Used
WIRE
HOLE
LABELED
WIRES
W
Not
Used
M32732
5
M32714
Remove metal
jumper if you
have both and
R
wires.
Rc