Time Setting - LG VR637 Series Owner's Manual

TIME SETTING

You can set or change the current time on the Robot Cleaner.
Pressing 'Clock' button on the Remote Controller, when the Robot Cleaner is in standby
mode, will start the clock setting mode.
Select by using '◄►'
buttons on the Remote
Controller.
The function can be heard
through the voice guide.
Tip
• Any scheduled cleaning will be activated based on the time on the Robot Cleaner. You
must set the clock before setting scheduled cleaning.
• If there is no input for 10 seconds, the clock setting is canceled.
24
Flickering
Flickering
Flickering
Set the hour by using '▲▼' buttons
on Remote Controller.
Set the minutes using '▲▼' buttons
on Remote Controller.
Set the AM/PM using '▲▼' buttons
on Remote Controller.
Pressing 'Clock' or 'Stop/OK' button
on Remote Controller will complete
the time setting process.