How To Turn The Robot Cleaner Power Supply On & Off - LG VR637 Series Owner's Manual

HOW TO TURN THE ROBOT CLEANER POWER SUPPLY ON & OFF
Turning on the main power supply
Make sure the Power Switch is on at the rear-left of the Robot
Cleaner.
If the power is OFF, turn the switch ON.
※ When turning on the power switch, do not press or touch any
button located on the upper section of the Robot Cleaner.
Button operations can be delayed.
※ Turn off the power switch if the Robot Cleaner is not used
for a long period of time in order to protect the battery. The
Robotic Cleaner cannot charge if the main switch is in the
"OFF" position.
Turning on from Stand By power.
With the Standby power of the Robot Cleaner OFF, press
'START/STOP' button for 1 second until a "Ting" sound is
heard. In about 10 seconds, the power will be on and a
melody will sound.
※ If 10 minutes elapse without the Robot Cleaner having being
given an active command after being turned on, the power
will automatically return to Standby again.
Turning off the power supply
Press and hold the 'START/STOP' button for two seconds
while the Robot Cleaner is turned on. A melody will sound
when the power is turned off.
Tip
• If the power cannot be turned on, do the following.
- Turn the main power switch OFF, wait 5 seconds then ON again.
- Press the 'START/STOP' button after the main power switch has been turned on again
- If the power is not turned on or if there is no display but only the "Ting" sound, put the
Robot Cleaner manually on to the home station as the battery may be flat.
16