Table of Contents
Advertisement
10
DISASSEMBLY INSTRUCTIONS
<"Terminal with locking mechanism" Detaching points>
The terminal which has the locking mechanism can be detached as shown below.
There are two types (Refer to (1) and (2)) of the terminal with locking mechanism.
The terminal without locking mechanism can be detached by pulling it out.
Check the shape of the terminal before detaching.
(1) Slide the sleeve and check if there is a locking lever or not.
Sleeve
Locking lever
10-1. MSZ-EF09NAW
MSZ-EF09NAB
MSZ-EF09NAS
OPERATING PROCEDURE
1. Removing the panel
(1) Remove the horizontal vanes.
(2) Remove the screw caps of the panel. Remove the
screws of the panel.
(3) Unhook the lower part ( ) of the panel.
(4) First, hold the lower part of the right end of the panel,
and hold the lower part of the left end of the panel.
(5) Pull the panel slightly toward you, and then remove
the panel by pushing it upward.
OBH736
Slide the sleeve.
Pull the terminal while
pushing the locking
lever.
MSZ-EF12NAW
MSZ-EF15NAW
MSZ-EF12NAB
MSZ-EF15NAB
MSZ-EF12NAS
MSZ-EF15NAS
(2) The terminal with this connector has the
locking mechanism.
Hold the sleeve, and
pull out the terminal
slowly.
Connector
MSZ-EF18NAW
MSZ-EF18NAB
MSZ-EF18NAS
NOTE: Turn OFF power supply before disassembly.
Photo 1
A
Front panel
Screws of
the panel
31
PHOTOS
Photo: MSZ-EF•NAB
Horizontal vanes
Advertisement
Table of Contents
