Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for hydrotab LS Series
Summary of Contents for hydrotab LS Series
- Page 1 Marine Engineering NMEA 2000 NMEA 0183 Hydrotab LS Series Installation...
-
Page 2: Table Of Contents
Marine Engineering Table of contents Disclaimer Installation Kit Before installation Safety Precautions Interceptor Installation Indirect Installation Spare Parts List Warranty Conditions Registration... -
Page 3: Disclaimer
Hydrotab inter- problem that will alter the boat’s course, rising ceptors. Our operating principal for improving... -
Page 4: Installation Kit
Marine Engineering Installation Kit 1. One Inteceptor per package 2. Interceptors’ Drilling pattern 3. Pipe 12mm 4. Fittings 5. Screws Interceptor mounting screws (6,3x50) Fitting mounting screws (4,8x25) Required Tools for Installation Drill Ø12 Drill Ø5 ,5 Drill Ø3 Drill Ø4 Sikaflex Gun Screw driver Allen Key N 05... -
Page 5: Before Installation
Marine Engineering Before Installation Proper Interceptor installation in transom Right Wrong Transom Transom Make sure there are no obstructions behind the drilling area (tanks, fuel lines, cabling) which can be damaged or prevent the installation procedure. If the boat’s transom has a significant curvature, it is neccecary to create a flat plane for the installation. -
Page 6: Interceptor Installation
Marine Engineering Interceptor Installation You will need You will need Tape No 3 No 4 No 5,5 No 8,5 Careful Drill all the pattern holes with 3mm bore without re- Remove the pattern and drill according to the pattern moving the pattern. instructions. -
Page 7: Indirect Installation
Marine Engineering Interceptor Installation You will need Allen Key No 5 M6,3x50 Mount the front cap and tighten the screws that were Mount the interceptor to the transom. removed at step 4. Mount the cap. Attention: Indirect Installation Before mounting the tube holder , Drill the transom, at the apply Sikaflex as... -
Page 8: Spare Parts List
Marine Engineering Spare Parts List... - Page 9 Marine Engineering...
-
Page 10: Warranty Conditions
2-year warranty. Anodes (consumables) are not included in the warranty .Hydrotab’s warranty only covers the repair or replacement of spare parts. System selections It is the sole responsibility of the buyer to choose the correct system and even with Hydrotab’s suggestion for a system, the overall responsibility is with the buyer. Limited warranty... - Page 11 Marine Engineering Notes...
- Page 12 Marine Engineering...
Need help?
Do you have a question about the LS Series and is the answer not in the manual?
Questions and answers