Disposal; Trouble-Shooting; Technical Specifications - Silvercrest 90248 Operating Instructions Manual

__RP90248_B1.book Seite 49 Freitag, 1. März 2013 10:48 10

11. Disposal

The symbol showing a wheel-
ie bin crossed through indi-
cates that the product requires
separate refuse collection in
the European Union. This ap-
plies to the product and all ac-
cessories marked with this
symbol. Products identified with this symbol
may not be discarded with normal household
waste, but must be taken to a collection point
for recycling electric and electronic applianc-
es. Recycling helps to reduce the consumption
of raw materials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.

12. Trouble-shooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric shock!
Do not attempt to repair the device
yourself under any circumstances.
Possible causes/
Fault
• Has the device been
No function
• Check the connection.
• No cooking vessel on
The cooking
zone is not • Is the cooking vessel
heating up
Action
connected to the pow-
er supply?
the cooking zone|2?
suitable for induction
cooking zones?
Possible causes/
Fault
• No cooking vessel on
the cooking zone|2?
Error message • Unsuitable cookware
E 1 on the dis-
on the cooking zone?
play • Cooking vessel not
placed centrally on the
cooking zone?
• Contact the Service
Error messages
Centre (see chapter
E 2 to E 7
Warranty)
13. Technical
specifications
Model: SIKP 2000 B1
Mains voltage: 220-240 V ~ 50/60 Hz
Protection class: II
Power rating: Max. 2000 W
Subject to technical modification.
Action
49
GB