Advertisement
8 Operating Procedures
Disconnect the two electrical connectors by
pulling them straight out from the receptacles.
Do not twist the connectors. Twisting will damage
the connector pins or the wiring harness.
Place dust caps on connectors to prevent
contamination.
Disconnect Plugs
Back inside the truck, return control of the
headlights to the truck and switch power off on
the snowplow control box, then slowly back the
truck out from the plow.
Turn Off Lights and Power
NOTE: The stop plate will automatically fall
forward as soon as the lift cylinder is fully extended
for raising the blade prior to transporting the plow.
If the snowplow won't be used for an extended
period of time, the prong weldment can be
removed from the truck by removing the hex bolts
that fasten it to the truck mount frame.
DWG NO. 6698
DWG NO. 4178
Advertisement
