DIMLUX MAXICONTROLLER User Manual page 7

MENU & KEYS
Auto calibrate
CO2 auto calibrate
The auto calibrate function sets the value automatically to 400 ppm if the sensor is located in outdoor air. Place the
Manual calibrate
co2 manual calib
0 ppm
You can also select to calibrate the sensor manually.
CO2 mode
You can opt to add or remove CO2 (air quality in living accommodation).
CO2 Addition is selected if CO2 needs to be added.
CO2 Removal is selected if CO2 needs to be removed. This is mandatory in public buildings.
Start dosing time
Start dosing tim
0 minutes
key and using the + and – keys, you can select the interval in minutes between lights on and dosing of CO2.
Stop dosing time
Stop dosing tim
0 minutes
select the interval in minutes between stopping the CO2 dosing and lights off by pressing the SET key.
EN
12
MENU & KEYS
CO2 night heater
CO2 night heater
setpoint 22°
A room can also be heated by the CO2 generator if the power supply is limited.
The night temperature can be set by pressing the SET key.
Take note
Advanced aux/fan menu
possible.
Temperature
RH Day
RH Night
Max fan speed Day
Max fan speed night
Min fan speed
Press SET once more to change these parameters.
The fan mode can be changed by pressing the SET key twice. The fan mode determines when the fan control becomes
the day than for the night.
The temperature mode can be used to set the temperature at which the fan must work faster.
The RH day mode can be used to set the maximum humidity during the day.
(Only visible if the fan mode dehumidify is selected)
The RH night mode can be used to set the maximum humidity during the night.
(Only visible if the fan mode dehumidify is selected)
Max speed day can be used to set the maximum fan speed during the day.
Max speed night can be used to set the maximum fan speed during the night.
The min. speed mode can be used to set the minimum fan speed.
(Some fans or ventilators cannot be dimmed by more than 30%). Always check for a draught and whether the fan is
working.
The aux settings for temperature
The aux settings for relative air humidity
EN
13