Subscribe to Our Youtube Channel
Related Manuals for DIMLUX MAXICONTROLLER
Summary of Contents for DIMLUX MAXICONTROLLER
- Page 1 DIMLUX MAXICONTROLLER USER MANUAL All manuals at: www.theclimatefactory.com Any othr information: info@theclimatefactory.com...
-
Page 2: Installation
INTRODUCTION INSTALLATION The Dimlux maxi controller is a modular control system for operating and monitoring the Dimlux lighting, CO2 and Temperature sensor VPD. The EVO controller is available with and without USB log function. The controller also has a thermostat/hygrostat The temperature sensor measures the room temperature and should be protected function (AUX) and can also control a fan. -
Page 3: Connections & Menu
CONNECTIONS CONNECTIONS & MENU Connecting the lighting ( Also see the other connectivity options on pages 19 & 20 ) dealer for more information. a high temperature safeguard, port +2 switches off. Interlink cables Connecting the CO2 The long cable including the plug is inserted into the port with the CO2 indication. - Page 4 MENU & KEYS MENU & KEYS Time Basic Advanced Menu Time 05:51 Using Using Press the SET Basic menu Advanced menu or – key. Pressing the ESCAPE key will return you to the Home screen. The controller has a basic and an advanced menu. This enables a very easy operation without the need to go through Timer ON/OFF the parameters that were set earlier.
- Page 5 MENU & KEYS MENU & KEYS Time Advanced Time (clock) Numerous parameters can be adjusted or set in the advanced menu. 16:17 Advanced keys OFF/MODE Date Date (d-m-y) Lights permanent off > light is always off. Lights permanent on > light is always on. 09-12-2015 Lights by timer >...
- Page 6 MENU & KEYS MENU & KEYS LCD back light operated by the even ports (2 and 4). Half of the lights are therefore turned off. LCD back light are off, all lights go off. Then there is probably a problem with the air conditioning in the room. The temperature limits can be altered by pressing the SET key.
- Page 7 MENU & KEYS MENU & KEYS CO2 night heater Auto calibrate CO2 night heater CO2 auto calibrate setpoint 22° A room can also be heated by the CO2 generator if the power supply is limited. The auto calibrate function sets the value automatically to 400 ppm if the sensor is located in outdoor air. Place the The night temperature can be set by pressing the SET key.
- Page 8 MENU & KEYS MENU & KEYS Controlled by RH aux port RH% (aux) Set type RH set Using an optional aux box, the controller can humidify or dehumidify during the periods lights on and lights off or Controlled by Heater aux port always.
- Page 9 MENU & KEYS MENU & KEYS / ERROR & EVENTS PT offset CO2 high/low PT>OFFSET H CO2 391p 13:15 0.0 °C L CO2 184p 13:13 Here you can adjust any deviation in the display of the temperature measured by the plant temperature (PT) camera. The highest and lowest CO2 value including the time are displayed.
-
Page 10: Connection Options
The maxi controller is supplied with one 5 meter Interlink cable. must be formatted. Ask your dealer for more information. ROOM SETUP Display indication on dimlux ballast equipment possible to see a possible error alert and the status. Off-DB Short... - Page 11 CONNECTION OPTIONS NOTES Other options for use in existing or older systems...
- Page 12 NOTES NOTES...
- Page 13 All manuals at: www.theclimatefactory.com Any other information: info@theclimatefactory.com...
Need help?
Do you have a question about the MAXICONTROLLER and is the answer not in the manual?
Questions and answers