Connection Options - DIMLUX MAXICONTROLLER User Manual

DATALOG AND DIMLUX
DATALOG (only EVO 2.0 Datalog)
The EVO DATALOG can be used together with a USB data stick to store all values measured by the controller
in order to view these later in graphic form on a PC. The controller writes the values onto the stick every minute.
on the screen.
key once more for four seconds to stop the log. The message "stop logger" appears on the screen.
must be formatted.
Display indication on dimlux ballast equipment
possible to see a possible error alert and the status.
Off-DB
On-DB
Off-Rem
Off-Rem
Open
or defective lamp
EN
18
Short
HTP
HVP
HVP
EOL

CONNECTION OPTIONS

Interlink cable
lamps that are switched ON, in order to ensure that the light pattern remains as equal and uniform as possible under
these circumstances.
The maxi controller is supplied with one 5 meter Interlink cable.
Ask your dealer for more information.
ROOM SETUP
1
6
7
2 3
5 4
8 9
EN
19