Dehumidifier/Fan/Heating Mode - Soleus Air PH4-13R-01 Operating Instructions Manual

NOTE: During hot days, the unit wil l cool the room most efficiently by setting the temperature at the lowest
setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the exhaust hose and
window kit, and keeping direct sunlight to a minimum will also improve the cooling efficiency.
NOTE: When the unit is running on cooling mode, the exhaust hoses are required and must be
vented outside using the supplied window kit.
Dehumidifier Mode
I) Install the exhaust hoses and window kit properly (see pages 6, 7 & 8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit
by pressing the POWER Button on
the control panel.
4) Press the MODE button until the"
0 "
appears on the control panel display.
NOTE: The unit operates at low
fa~ speed during
dehumidifier mode. The unit cools room slightly during
the dehumidification. Keep the windows and doors closed to aid the effectiveness ofthe unit in removing the
moisture from the room.
NOTE: When the unit is running on dehumidifier mode, the exhaust hoses are required and must
be vented outside using the supplied window kit.
NOTE: The
unit will not perform in dehumidifier mode when the room temperature is lower than 61 °F.
Fan Mode
I) Plug the Power Cord into an electrical outlet.
2) Turn on the unit by pressing the
POWER button on
the control pane l.
3) Press the MODE button until the"
2f5 "
icon appears on the control panel display.
4) Select the fan speed by pressing the FAN SPEED button.
5) To circulate more air, press the SWING button on the remote control. The louvers will oscillate in our
exclusive WAVEFLO® pattern which moves the louvers up and down to increase air circulation.
NOTE: It is not necessary for the exhaust hoses and window kit to be installed to operate the unit in fan mode.
Heating Mode
I) Install the exhaust hoses and window kit properly (see pages 6, 7
&
8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER button on the control panel.
4) Press the MODE button until the"
~ "icon
appears on the control panel display.
S)
Press the'" or ... buttons until the desired room temperature appears on the control panel display. The
o
0 0 0
temperature ranges from 61 F - 88 F (16 C - 31 C).
6) Select the fan speed by pressing the FAN SPEED button. It is recommended to set the fan speed to low.
NOTE : When heal mode is selected, the unit will shut down for 3-5 minuWs,
th~n
start in healing mode.
NOTE: When the unit is running on heating mode, the exhaust hoses are required and must be
vented outside using the supplied window kit.
"