Table of Contents
Advertisement
OPERATION USING THE CONTROL PANEL
COOLING
1. Properly install the exhaust hoses.
2. Plug the power cord into a grounded outlet.
3. Turn on the unit by pressing the On/Off button on the control panel.
4. Press the Mode button until "
5. Press the ∧ or ∨ buttons until the desired temperature appears on the multi-colour display.
The temperature ranges from 61
6. Select the fan speed by pressing the Fan button.
NOTE: During hot days, the unit will cool off the room most efficiently by setting the temperature at the lowest and the
fan speed at the highest. Reducing the length of the exhaust hoses, insulating the exhaust hoses, and keeping direct
sunlight to a minimum will also improve the cooling efficiency.
DEHUMIDIFYING
1. Properly install the exhaust hoses.
2. Plug the power cord into a grounded outlet.
3. Turn on the unit by pressing the On/Off button on the control panel.
4. Press the Mode button until the "
NOTE: The unit operates at low fan speed during dehumidifying. The unit cools the room slightly during
dehumidification.
Keep the windows and the doors closed to aid in the effectiveness of the unit in removing the moisture from the
room.
NOTE: The unit will not dehumidify when the room temperature is lower than 61
FAN MODE
1. Plug the power cord into a grounded outlet.
2. Turn on the unit by pressing the On/Off button on the control panel.
3. Press the Mode button until "
4. Select the fan speed by pressing the Fan button.
NOTE: When the unit is running on fan mode, the exhaust hoses are inoperative and are not required.
HEATING
1. Plug the power cord into a grounded outlet.
2. Turn on the unit by pressing the On/Off button on the control panel.
3. Press the Mode button until "
4. Press the ∧ or ∨ button until the desired room temperature appears on the multi-colour
display. The temperature ranges from 61
5. Select the fan speed by pressing the Fan button. It is recommended to use the low fan
speed.
NOTE: When the unit is running on heating mode, the exhaust hose is operative the same way as cooling mode.
AUTO MODE
1. Properly install the exhaust hoses.
2. Plug the power cord into a grounded outlet.
3. Turn on the unit by pressing the On/Off button on the control panel.
4. Press the Mode button until the "
5. Press the Fan button to select the fan speed.
or
" icon appears on the multi-colour display.
°
°
°
°
F - 88
F (16
C - 31
C).
or
" icon appears on the multi-colour display.
" icon appears on the multi-colour display.
" icon appears on the multi-colour display.
°
F - 88
°
F (16
°
C - 31
or
" icon appears on the multi-colour display.
13
°
F.
°
C).
Advertisement
Table of Contents
