Download Print this page

Sony AC-110MD Instructions For Use Manual page 23

Hide thumbs Also See for AC-110MD:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 14
Maintenance
Be sure to disconnect the power cord from the monitor
before performing maintenance. When solvents such as
benzene or thinner; acid, alkaline or abrasive detergent; or
chemical cleaning cloths are used on the AC adaptor
surface, the surface finish may be damaged. Take care with
respect to the following:
• Clean the AC adaptor surface with a 50 to 70 v/v%
concentration of isopropyl alcohol or a 76.9 to 81.4 v/v%
concentration of ethanol.
• Stubborn stains may be removed with a soft cloth such
as a cleaning cloth by lightly dampening with mild
detergent solution and then cleaning using the above
chemical.
• Do not use unnecessary force to rub the AC adaptor
surface with a stained cloth. The AC adaptor surface may
be scratched.
• Do not keep the AC adaptor surface in contact with a
rubber or vinyl resin product for a long period of time.
The surface finish may deteriorate or the coating may
come off.
Specifications
Power
AC IN: 100 V-240 V, 50/60 Hz, 1.53 A-
0.58 A
DC OUT: 24 V 5.0 A 5 V 0.060 A
Operating conditions
Temperature
0 °C to 35 °C (32 °F to 95 °F)
Recommended temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity
30% to 85% (no condensation)
Pressure
700 hPa to 1060 hPa
Storage and transport conditions
Temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Humidity
0% to 90%
Pressure
700 hPa to 1060 hPa
Approx. 95.2 × 54.5 × 264.8 mm
Dimensions
(w × h × d) (3
inches)
Mass
1.2 kg (2 lb 10 oz)
Accessories supplied
AC power cord (1)
AC plug holder (2)
Instructions for Use (1)
Service Contact List (1)
Information for Customers in Europe (1)
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of water:
Ordinary
Degree of safety in the presence of a flammable anesthetic
mixture with air or with oxygen or nitrous oxide:
Not suitable for use in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous
oxide
Mode of operation:
Continuous
Design and specifications are subject to change without
notice.
3
× 2
1
× 10
1
/
/
/
4
4
2
11
Maintenance / Specifications
GB

Advertisement

loading