Table of Contents
Advertisement
14. With one hand on the thickness control knob, and other hand away from the blade, slowly turn the
Thickness Control Knob counterclockwise until the abrasive stone touches the front edge of the
blade. Again you will be able to hear a slight noise when contact is made. Maintain a light contact for
only 4-6 seconds to remove the burr, which was created along the edge in Step 9. Promptly turn the
thickness control knob clockwise to stop contact of the abrasive wheel with the blade. Your blade is
now very sharp.
15. Turn off the power switch and unplug the power cord from the outlet.
16. Remove the sharpener as in Step 10.
17. You may wish to clean the blade as described in the previous "Cleaning the Blade (without removal
of blade)" section before cutting food.
18. After many sharpenings, when the gap between the blade edge and the thickness control plate
(in fully closed position) exceeds 6 mm, the blade must be replaced.
Service
No user-serviceable parts are inside. Refer servicing to qualified personnel.
In the event service is needed, you may return your food slicer to EdgeCraft Corp., where the cost of
repair or electrical or mechanical adjustment can be estimated before the repair is undertaken. Please
include your return address and a brief description of the problem or damage to the slicer on a separate
sheet inside the box.
Send your slicer, insured and postage prepaid to:
Retain evidence of shipping for your protection.
Limited Warranty: Used with normal care, this EdgeCraft product is guaranteed against defective material and workmanship for a period of one (1) year from the
date of original purchase ("Warranty Period"). We will repair or replace, at our option, any product or part that is defective in material or workmanship without charge
if the product is returned to us postage prepaid with dated proof of purchase within the Warranty Period. This warranty does not apply to commercial use or any prod-
uct abuse. ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE
WARRANTY PERIOD. EDGECRAFT CORPORATION SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow limitations
on how long an implied warranty lasts and some states do not allow exclusions or limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you. This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
This product may be covered by one or more EdgeCraft patents and/or patents pending as marked on the product.
Conforms to: UL 982 Certified to CAN/CSA: C22.2#1335.1, 1335.14
© EdgeCraft Corporation 2017
EdgeCraft Corporation
825 Southwood Road
Avondale, PA 19311 U.S.A.
Telephone: 800-342-3255
12
120 volts/60Hertz,250 watts
H17
S663004
Advertisement
Table of Contents
