IMportant SaFEguardS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions carefully before using slicer, to maximize results and to avoid injury. 2. To protect against risk of electrical shock, do not immerse power unit in water or other liquid or operate in wet areas.
Page 3
made a good choice! Congratulations on your selection of the Chef’sChoice Electric Food Slicer. As an owner ® of an Chef’sChoice slicer, you have the finest ® and easiest-to-use product for slicing meat, cheese, bread, vegetables and fruits. You can be assured that this food slicer will perform superbly and be a joy to own.
Parts List* 1. On/Off Power Switch 2. Thickness guide plate 3. Food pusher 4. Food carriage 4a. Thumb guard plate 5. Carriage track 6. Rubber feet 7. Thickness control knob 8. Base 9. Slice deflector 10. Carriage “Lock/Remove” control 11. Blade retaining screw 12.
Page 5
Securing the blade guard For your safety, the food carriage (4) contains a thumb guard plate (4a) that can be moved in front of the blade’s cutting edge and locked in place when the slicer is not in use. This protects you and children from inadvertent contact with the blade edge.
Page 6
To Slice 1. Plug cord into polarized two pronged two wire 120V, AC outlet. Push excess cord into the cord storage compartment (Fig. 3). Cord Safety: A short power cord is provided with this appliance to reduce the possibility of someone becoming entangled in it or tripping over it.
Page 7
lightly with a few drops of acid-free light household oil such as sewing machine oil (Fig. 6). Stainless steel blade To remove the cutting blade, insert a coin in the slot of the blade fastening screw (11) and turn the screw clockwise until the blade retaining screw is fully removed (Fig.
Page 8
notice: This Chef’sChoice Electric Food Slicer has been equipped ® with a protective fuse to prevent the motor from overheating. In the unlikely event that the fuse fails, a spare fuse has been supplied with your slicer. To remove the old fuse, make certain that the Power Switch is in OFF position, that the power cord has been unplugged, that the thickness plate is in the “0”...
Need help?
Do you have a question about the 609A000 and is the answer not in the manual?
Questions and answers