Advertisement
Quick Links
Advertisement
Related Manuals for Chef's Choice 615
Summary of Contents for Chef's Choice 615
- Page 1 Premium Electric Food Slicer Model 615...
-
Page 2: Important Safeguards
IMPortant SaFEguardS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions carefully before using slicer, to maximize results and to avoid injury. 2. To protect against risk of electrical shock, do not immerse power unit in water or other liquid or operate in wet areas. - Page 3 You can be assured that this food slicer will perform superbly and be a joy to own. The Model 615 slicer incorporates EdgeCraft’s proprietary Advanced Power-Cooling to keep ™...
-
Page 4: Parts List
Parts List* 1. On/Off/Pulse Power Switch 2. Thickness guide plate 3. Food pusher, metallic 4. Food carriage 4a. Thumb guard plate 5. Carriage track 6. Rubber feet 7. Thickness control knob 8. Base plate 9. Slice deflector 10. Carriage “Lock/Remove” control 11. - Page 5 Securing the blade guard For your safety, the food carriage (4) contains a thumb guard plate (4a) that can be moved in front of the blade’s cutting edge and locked in place when the slicer is not in use. This protects you and children from inadvertent contact with the blade edge.
- Page 6 To Slice 1. Plug cord into 120V, AC outlet. Push excess cord into the cord storage compartment (Fig. 3). Cord Safety: A short power cord is provided with this appliance to reduce the possibility of someone becoming entangled in it or tripping over it. While EdgeCraft does not recommend it, extension cords may be used.
- Page 7 Slice deflector The Model 615 is equipped with a detachable slice deflector (item #9, see page 4) to insure smooth deflection of each slice onto the tray. This can be removed for cleaning. always first remove the slicer blade and thickness control plate as shown in Figures 8 and 9.
-
Page 8: Hints For Best Results
notice: This Chef’sChoice Electric Food Slicer has been equipped ® with a protective fuse to prevent the motor from overheating. In the unlikely event that the fuse fails, a spare fuse has been supplied with your slicer. To remove the old fuse, make certain that the Power Switch is in OFF position, that the power cord has been unplugged, that the thickness plate is in the “0”...