Replacing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Using the alignment posts, place the I/O board on the palm-rest assembly and
snap the I/O board into place.
2
Slide the I/O-board cable into the connector on the I/O board and close the
latch to secure the cable.
Post-requisites
1
Replace the
hard
2
Replace the
base
3
Replace the keyboard.
4
Replace the
optical
5
Replace the battery.
48
computer. After working inside your computer, follow
After working inside your
drive.
cover.
drive.
computer. For more safety best
www.dell.com/
Before