Function Setting; Working Area Setting - Huion KAMVAS Pro 13 User Manual

EN
5

/ Function Setting

5.1 Working Area Setting

5.1.1 Using Multiple Monitors
Select the Working Area tab to define the relationship between pen movement on
the display and cursor movement on the monitor screen.
By default the entire active area of display maps to the entire monitor. If more
than one monitor is in use and you are in extended mode, you need to choose the
related monitor on the driver interface which you are going to map to.
If your monitors are in mirror mode (All monitors display the same content), the
display maps to the entire space on each monitor and the screen cursor is displayed
on each monitor simultaneously.
5.1.2 Working Area Setting
Define the display area that will be mapped to the screen area.
[1] Full Area: the entire active area of the display. This is the default setting.
[2] Screen Ratio: As a general rule, be 16:9.
[3] Customized Area:
1> Enter coordinate values.
2> Drag the corners of the foreground graphic to select the screen area.
13
GT-133