Klarstein HOT & HOT 10033534 Instructions Manual page 29

• Please choose flexible hose whose heatproof higher than 80 °C.
• Flexible tube should be changed every 2 years; It's necessary to change the flex-
ible tube when the national conditions require it.
How to change your cylinder
Note: Turn off the switch of cylinder (No spanner is required).
If put the gas cylinder outside the grill, The height of the gas cylinder is below the 80 cm,
and the width is within 35 cm, Net weight of gas cylinder should not be more than
15 kg.
How to connect a gas bottle
1. Turn the orange cap so that the arrow is pointing to the gap in the shroud.
2. Remove the orange safety cap by pulling the lanyard out, then out. Do not use
tools. Leave the cap hanging.
3. Check that the black sealing washer is fitted inside the cylinder valve. Connect the
regulator to the valve.
4. Turn the switch clockwise on gas bottle-then turn on the gas grill as instructed.
EN
29