TP-Link Archer AC2600 User Manual page 14

Chapter 2
6. Confirm that the following LEDs are on and solid to verify the hardware is connected
correctly.
Note:
• If all the LEDs are off, press the LED On/Off button at the top panel for about 1 second, and then check the LEDs again.
• If the 2.4GHz and 5GHz LEDs are off, press the Wi-Fi On/Off button at the side panel for about 2 seconds, then both
LEDs should turn stable in a few seconds.
Tip:
For optimum performance, orient the four antennas as shown in the drawing below.
7. Connect your computer to the router.
• Method 1: Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.
• Method 2: Wirelessly
1 ) Find the SSID (Network Name) and Wireless Password printed on the label at
the bottom of the router.
2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart
device, and then select the SSID to join the network.
Computer
Connections are available
Wireless Network Connection
TP-Link_XXXX
TP-Link_XXXX_5G
Connect automatically
Power
2.4GHz 5GHz
On
On On
30°
Ethernet Cable
OR
Connect
Connect the Hardware
Internet
On
30°
Smart Device
< Settings Wi-Fi
Wi-Fi
CHOOSE A NETWORK...
TP-Link_XXXX
TP-Link_XXXX_5G
Other...
10