Table of Contents
Advertisement
Chapter 4
Note:
If you are unsure of what your connection type is, click
cables and connection information, you can also refer to the demonstrations in Step 4 to determine your connection
type.
4. Follow the instructions on the page to continue the configuration. Parameters on the
figures are just used for demonstration.
1 ) If you choose
Dynamic IP users are usually equipped with a cable TV or fiber cable.
2 ) If you choose
corresponding fields.
Auto
Dynamic
IP, you need to select whether to clone the MAC address.
Static
IP, enter the information provided by your ISP in the
Set Up Internet Connection
Detect. Since different connection types require different
16
Advertisement
Table of Contents
