Removing The I/O Board; Prerequisites; Procedure - Dell Inspiron 3583 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

CAUTION: Removing the coin-cell battery resets the BIOS setup program's settings to default. Before removing the I/O board
along with the coin-cell battery, it is recommended to note the BIOS setup program's settings.
1 Remove the base cover.
2 Remove the battery.
3 Remove the hard drive.
Identifier
Status

Procedure

1 Disconnect the coin-cell battery cable from the I/O board.
2 Open the latch and disconnect the I/O-board cable from the system board.
3 Remove the two screws (M2x4) that secure the I/O board to the palm rest and keyboard assembly.
4 Lift the I/O board off the palm rest and keyboard assembly.
GUID-DC61C8F1-86D0-49DE-B8D8-229750E714D6
Released
computer. After working inside your computer, follow the instructions in
GUID-9931115C-5CF8-4350-BE49-9682D8D38751
Released
GUID-73DE3A3C-C07A-43F5-A41A-0C8BB5689314
Released

Removing the I/O board

32
After working inside
www.dell.com/
Removing the I/O board 65