Replacing The Base Cover; Procedure - Dell Inspiron 3583 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Procedure

1 Connect the battery cable to the system board, if applicable.
CAUTION: To avoid accidental damage to the power-adapter port, do not press the base cover against the power-
adapter port when you snap the base cover to the computer base.
2 Place the base cover on the palm rest and keyboard assembly.
3 Snap the base cover into place starting from the power-adapter port.
4 Tighten the three captive screws that secure the base cover to the palm rest and keyboard assembly.
5 Replace the six screws (M2.5x7) that secure the base cover to the palm rest and keyboard assembly.
6 Replace the screw (M2x4) that secures the base cover to the palm rest and keyboard assembly.
GUID-27446428-82D7-4881-9220-9EB090B046EA
Released
computer. After working inside your computer, follow the instructions in
GUID-8D357032-697E-45AF-BC06-14C6A5D8EBE7
Released

Replacing the base cover

After working inside
www.dell.com/
Replacing the base cover
7
19