Enabling Intel Optane Memory - Dell Inspiron 3583 Service Manual

Amber — Computer is running on battery and the battery has less than 5 percent charge.
Off
• Power adapter is connected and the battery is fully charged.
• Computer is running on battery and the battery has more than 5 percent charge.
• Computer is in sleep state, hibernation, or turned off.
The power and battery-status light blinks amber along with beep codes indicating failures.
For example, the power and battery-status light blinks amber two times followed by a pause, and then blinks white three times followed by
a pause. This 2,3 pattern continues until the computer is turned off indicating no memory or RAM is detected.
The following table shows different power and battery-status light patterns and associated problems.
Table 14. LED codes
Diagnostic light codes
2,1
2,2
2,3
2,4
2,5
2,6
2,7
3,1
3,2
3,3
3,4
3,5
3,6
3,7
Camera status light: Indicates whether the camera is in use.
• Solid white — Camera is in use.
• Off — Camera is not in use.
Caps Lock status light: Indicates whether Caps Lock is enabled or disabled.
• Solid white — Caps Lock enabled.
• Off — Caps Lock disabled.
Identifier
Status

Enabling Intel Optane memory

1 On the taskbar, click the search box, and then type Intel Rapid Storage Technology.
2 Click Intel Rapid Storage Technology.
The Intel Rapid Storage Technology window is displayed.
Problem description
Processor failure
System board: BIOS or ROM (Read-Only Memory) failure
No memory or RAM (Random-Access Memory) detected
Memory or RAM (Random-Access Memory) failure
Invalid memory installed
System-board or chipset error
Display failure
Coin-cell battery failure
PCI, video card/chip failure
Recovery image not found
Recovery image found but invalid
Power-rail failure
System BIOS Flash incomplete
Management Engine (ME) error
GUID-FE39A314-6129-4A79-A5FA-B69617360582
Released
Troubleshooting 119