Dimplex SWM4820 Owner's Manual page 15

Operation
1
POWER ON/OFF
The Power ON/OFF button turns the fireplace ON and OFF.
2
The fireplace has a built-in memory function. When the fireplace is turned back
on, the display will show the last selected function and it will start at the last used
5
settings (except timer). If the fireplace is disconnected from the main power source,
it will restart at the default settings.
1
2
FLAME CONTROL
Pressing the Flame Control button turns the flames on and lights up the ember
5
bed. Press the Flame Control button repeatedly to change the ember bed color by
cycling through the following options: (1) amber, (2) blue, (3) amber and blue (4) color
rotation. Fifth press turns the flames and ember bed OFF [and when the heater is on
only the flames will be turned off].
HEAT CONTROL
Press the Heat Control button to
turn the heater ON and OFF.
To change the set temperature,
while the heater is ON, press and
hold the Heat Control button on
the control panel for 5 seconds.
The display on the side of the
fireplace will flash, indicating the
unit is in set mode. Press the
Heat Control button repeatedly to
cycle through the 11 temperature
settings.
When the unit display indicates 'ON', the heater operates continuously.
!
The temperature cannot be set with the remote control.
NOTE:
1
2
5
6
5
6
4
3
5
2
4
1
3
2
Display Value
9
1
NONE
0
1
2
3
4
5
6
7
8
6
Temperature Setting
5
82°F / 27°F
ON
4
64°F / 18°C
66°F / 19°C
3
68°F / 20°C
70°F / 21°C
2
72°F / 22°C
74°F / 23°C
1
76°F / 24°C
78°F / 25°C
80°F / 26°C
15