Standby Screen Explained; Installing Your Skyway On The Windscreen - aguri SKYWAY GTX90 User Manual

Standby screen explained

GPS status - connected
Smart mode GPS clock Your speed

Installing your Skyway on the windscreen

Attach the windscreen bracket by sliding it into the slot on the rear of
the unit. (Attach the suction cups if they are not already attached) Using
the suction cup bracket, mount your Skyway in a safe and convenient
position in the front windscreen where it has an unobstructed view of
the road ahead. We recommend mounting it toward the bottom of the
windscreen, just above the dashboard so that it has a good view of the
road ahead, but so that its view is not obstructed by the windscreen
wipers. Remember, that you will need to attach the power cable to
the unit and plug the other end in to your cigarette lighter/12V power
socket, so find a position where this can be done without obstructing or
becoming a danger to the driver or passengers.
Once you have chosen a suitable location, thoroughly clean the glass,
then press the suction cup bracket to position, ensuring that it is well
secured. Finally, adjust the bracket so that the unit is in a horizontal
position. Please note that you will have to gently bend the bracket to
do this.
Do not leave your Skyway in the windscreen when you leave your
vehicle in hot and sunny conditions.
5