How To Install The Drivers Required To Connect Your Skyway To Your Pc And Update The Software And Speed Camera Database - aguri SKYWAY GTX90 User Manual

Laser alert
Driving mode
selected (Highway)
Laser detected
How to install the Drivers required to connect your Skyway
to your PC and update the software and speed camera
database.
Please note you may not need a Driver if you have Windows 11
installed but if your Skyway GTX90 will not connect to your PC,
please use the Windows 10 Driver.
Install the Driver.
1. Download "Skyway GTX90 software and speed trap database
updater" from the Software updates section of our website.
2. The folder you have downloaded will be zipped and will need
unzipping so that you can access the software inside. Instructions
explaining how to unzip a folder can be found in the FAQ section of our
website.
If you do not have any Zip software already installed on your PC,
free Zip software can be downloaded from www.7zip.org
GPS - connected
Your current speed
22
Signal strength indicates
how close you are to the
source of the radar