4-2. Rs485 Test - Trycom Technology TRP-C06H User Manual

.Click the "OK" the utility will show the input and output status.
STEP3:

4-2. RS485 test

Refer to 3-6 for RS-485 wire connection. User may also directly link TRP-C06H to Trycom
Remote IO modules, the wiring connection is as below.
Step1. Install TRPCOM utility.
TRPCOM is a test utility which may help user to test TRP-C06H with RS485 device easily. User
may find the utility in the TRP-C06H support disk. Double click "setup.exe", the install wizard will
guide you to complete the installation.
Step2. Configure COM port and baud rate, after configuration press "OK" to the next screen.
7