12.2.4.1
Wire Stripping and Connection Requirement
Wire stripping
No loose
strand when
inserted
Conductor
fully inserted
ACCEPT
RISK OF FIRE
JOINING OF WIRES
MAY CAUSE
WARNING
OVERHEATING
AND FIRE.
Do not joint wires.
OR
Use complete wire without joining.
Use approved socket and plug with earth pin.
Wire connection in this area must follow to national wiring rules.
Do not connect power supply to indoor and outdoor unit
at the same time.
Risk of fi re if wrong connection of power supply.
CAUTION
Indoor/outdoor
connection
terminal board
5 mm or more
(gap between wires)
Conductor not
Conductor
fully inserted
over inserted
PROHIBITED
PROHIBITED
OR
64
OR