Importing A Clone File - LG 65WU960H Commercial Mode Setup Manual

Hide thumbs Also See for 65WU960H:

Easy setup manual (65 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

Table of Contents

Cloning Procedures (Cont.)

(Continued from previous page)

DATA CLONING

< 01

USB 1: Device Name

Select the filename, and then select EXPORT.

Import Clone File

Export Clone File

11. When you are ready to continue, i.e., when you have selected the desired filename, press the

Wheel (OK) button on the Installer Remote to select/activate the EXPORT button at the top

right of the screen, and then press the Wheel (OK) button on the Installer Remote once more

to export the file.

Export progress will be displayed on the screen. This process may take a few minutes. Do

NOT remove the USB device while exporting is in progress. When the export process is

complete, an "Export Clone File is completed" pop-up message will be displayed on the screen.

12. Press the Wheel (OK) button to return to the TV Manager / Data Cloning screen. To return to

program viewing, select the

13. Remove the USB memory device from the Master TV.

Note: If the Master TV has a channel lineup, during the export process, logical

channel numbers are automatically assigned in ascending order, starting with 0

(zero), to the physical RF channels of the TV channel lineup to create an FTG

Channel Map. See also note below.

Note: If the exported Clone file is to be used for FTG Mode configuration (i.e., it

contains an FTG Channel Map), it is highly recommended that you open the file in

the Cloud Configuration Tool—BEFORE transferring (importing) the file to any

Target TVs—to verify FTG Channel Map and FTG Installer Menu settings. This will

also enable you to confirm channels and add channel attributes, labels, etc.