Table of Contents
Advertisement
(Continued from previous page)
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
TV MANAGER
USB 1: Device Name
Select the desired option below.
Ez Download
Data Cloning
3. If more than one USB memory device is currently connected to the TV, be sure to select the
USB device that contains the file(s) you wish to use. If necessary, use the arrow keys on the
Installer Remote to select/highlight the USB DEVICE button at the top right of the screen and
press the Wheel (OK) button. Then, use the Up/Down arrow keys to select the appropriate
USB device from the pop-up list of USB devices displayed at the top of the screen.
4. Select the appropriate option from the TV Manager, and initiate the desired download(s)/
update(s).
Download/update progress will be displayed on the screen. Do NOT remove the USB device
while downloads/updates are in progress. When the process is complete, the TV will reboot.
Upon restart, depending on the type of download(s)/update(s) completed, either the EZ-Manager
TV Configuration Options screen will be redisplayed (image and/or software downloads/
updates only) or the TV will tune according to the Start Channel setting in the Installer Menu
(TV configured with Clone/Configuration file).
Note: If the TV Configuration Options screen is redisplayed (image and/or software downloads/
updates only), you can either proceed with configuration via the EZ-Manager Wizard or exit
the EZ-Manager Wizard, as required.
5. Remove the USB memory device, and verify that the appropriate configuration/download(s)/
update(s) is/are resident on the TV.
206-4335
DIAGNOSTICS: ON
Image Download
Icon Download
EZ-Manager Wizard (Cont.)
X
USB DEVICE
Software Update
33
Advertisement
Table of Contents
