Importing A Clone File - LG 65UV770H Setup Manual

Cloning Procedures
(Continued from previous page)
TV MANAGER
Export Clone File
USB 1: Device Name
Ez Download
Select the filename, and then select EXPORT below.
Logo Image Download
Insert Background Image(s)
xxUV770H-UA_1.TLX
Update TV Software
Update PTC Software
Import Clone File
Export Clone File
Diagnostics
10. When you are ready to continue, i.e., when you have selected the desired filename, press
OK on the Installer Remote to select/activate the EXPORT button at the bottom of the screen,
and then press OK on the Installer Remote once more to export the file.
Export progress will be displayed on the screen. This process may take a few minutes.
Do NOT remove the USB device while exporting is in progress. When the export process is
complete, an EXPORT COMPLETE pop-up banner will be displayed at the bottom of the
screen.
11. Press OK to return to the TV Manager screen. To return to program viewing, select the
button at the top right corner of the screen.
12. Remove the USB memory device from the Master TV.
Note: If the Master TV has a channel lineup, during the export process, logical
channel numbers are automatically assigned in ascending order, starting with 0
(zero), to the physical RF channels of the TV channel lineup to create an FTG
Channel Map. See also note below.
Note: If the exported Clone file is to be used for FTG Mode via CPU configuration
(i.e., it contains an FTG Channel Map), it is highly recommended that you open the
file in the Cloud Configuration Tool—BEFORE transferring (importing) the file to any
Target TVs—to verify FTG Channel Map and FTG Installer Menu settings. This will
also enable you to confirm channels and add channel attributes, labels, etc.

Importing a Clone File

This section describes how to transfer (import) a Clone or Configuration (.tlx) file from a USB
memory device to a TV using the TV Manager "Import Clone File" option. The ".tlx" file may be
created either from a Master TV Setup that was saved (exported) from a Master TV or in the
Cloud Configuration Tool.
Before You Begin
• Ensure the USB device has been formatted with FAT format.
46
EXPORT
X
USB DEVICE
X
206-4323