Operating Instructions - Curtis Primo Cappuccino PCGT3700 User Manual

OPERATING INSTRUCTIONS

Dispensing
WARNING - TO AVOID SCALDING, AVOID SPLASHING. Keep body parts clear of the spout during
dispensing. Do not remove the cup during dispensing.
The G3 dispenser is factory preset for optimal performance.
The unit should be ON.
switch. "Ready to Dispense"
should be on the display.
4 Place a cup under the spout
dispenser is set for iced
2 Open the front panel. On
some models the panel
swings to the right, on others,
the panel swings up. Turn
the elbow on each canister
each canister up and out. Fill
with powdered cappuccino
product.
Preset Dispense Models:
5A 5 Push and release the
dispensing button for the
size. Remove the cup when
Reinstall each canister in the
same spot it was removed
from. Properly mate the
gear socket on the back of
each canister with the gear
inside the dispenser. Turn the
canister elbows downward
and close the door.
Manual Dispense Models:
6 5B Push and hold the dispensing
Release the button when the
cup is ¾ full. Remove the cup
OI33