Siemens Gigaset 4215 User Manual page 50

Operating the Answering Machine
Press keys:
¥ ¬ Ÿ
D
åååååååååååååååååååååååååååååååå
Ans Machine
D
åååååååååååååååååååååååååååååååå
Announcements
D
åååååååååååååååååååååååååååååååå
Mode
D
åååååååååååååååååååååååååååååååå
Annc
D
åååååååååååååååååååååååååååååååå
Annc Only
42
Setting a Different Language
You may change the language for the voice prompts
and for the standard announcement.
MENU
Press Menu.
From the keypad enter 8, 9, 2 then the number of the
desired language from the table below.
]
Ÿ
For example to set the language to English you would
press Menu then enter 8, 9, 2, 1.
Selecting an Announcement
A standard announcement is already preset: "There
is nobody available to take your call right now. Please
leave a message after the tone. "
This announcement is used until you record your own
announcement, or after you have deleted your own an-
nouncement.
When selecting an announcement you may choose
from the following two options:
Announcement – Plays the announcement and re-
G
cords messages
Announcement Only – Plays the announcement
G
but does not record messages
You can only select the Announcement Only if you
have already recorded an Announcement Only mes-
sage (see page 43).
MENU
Press Menu.
[
Scroll to Ans Machine and press OK.
[
Scroll to Announcements and press OK.
[
Scroll to Mode and press OK.
[
Scroll to Annc and press OK to activate the Announce-
ment (A check mark indicates option is selected) .
An announcement can be recorded.
or
[
Scroll to Annc Only and press OK to activate the An-
nouncement Only (A check mark indicates option is
selected).
The announcement you selected is available even after
the answering machine has been switched off.
English
French
^
Spanish