Table of Contents
Advertisement
At both spacers, undo the screw and remove the
9.
spacer (fig.
).
'
Lift out the first inner panel (fig.
10.
carefully on a flat surface.
Lift out the second inner panel (fig.
11.
down carefully on a flat surface.
Clean the panels with glass cleaner and a soft cloth.
:
Warning
Risk of injury!
Scratched glass in the appliance door may develop
■
into a crack. Do not use a glass scraper, sharp or
abrasive cleaning aids or detergents.
The hinges on the appliance door move when
Risk of injury!
■
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Components inside the appliance door may have
Risk of injury!
■
sharp edges. Wear protective gloves.
Fitting panels
Slide each inner panel back in and make sure that
1.
the number on the inner panel is to the bottom right
(fig.
).
!
Ensure that the inner panel is in the bottom right of
2.
the retainer (fig.
).
"
Push the inner panel in
3.
at the top (fig.
).
#
) and set it down
(
) and set it
)
Slide the other inner panel back in and make sure
4.
that the number on the inner panel is to the bottom
right (fig.
).
$
Ensure that the inner panel is in the bottom right of
5.
the retainer (fig.
).
%
Push the inner panel in
6.
at the top (fig.
).
&
Place both spacers at the arrows on the first inner
7.
panel (fig.
).
'
Use one screw each to secure both spacers (fig.
8.
Appliance door
en
).
(
31
Advertisement
Table of Contents
