12
Getting started
Use the battery cover as illustrated to
press the Micro SD Card slightly into
the slot.
To remove one of the cards use the
corner of the battery cover to release
or push in the SIM card and the Micro
SD Card. Otherwise you risk damag-
ing the SIM card release mechanism.
The card is ejected.
Please observe the manufacturer's oper-
ating instructions that come with the Micro
SD Card.
Inserting the battery
Insert the battery into the phone
then press it downwards
engages.
3
,
4
until it
To close the cover place the cover in
position, so that the check marks get
caught in the cut-outs
press it downwards, until it clicks in-
6
to place
.
Removing the battery
Attention
Please switch off your phone before
removing the battery!
To open the cover, push the cover
open and lift it up.
To remove the battery, press against
the battery in the direction indicated
7
and lift the battery up
Charging the battery
The battery is not fully charged
when delivered. Plug the charger
cable into the bottom of the phone.
5
. Then
8
and out.