Siemens C62 User Manual page 48

Problem Possible causes
No connection to Weak signal.
network.
Outside GSM range.
SIM card not valid.
New network not authorised. Try manual selection or select a different network
Network barring is set.
Network overloaded.
Phone loses Signal too weak.
network.
Calls not possible. Second line set.
New SIM card inserted.
Charge limit reached.
Credit used up.
Certain uses of the Call restrictions are set.
phone not possible.
No entries in Add- Addressbook is fulll.
ressbook possible.
Voice mail does not Call divert to the mailbox not
work set.
SMS (text mes- SMS memory is full.
sage) flashing.
Function cannot Not supported by service
be set. provider or registration re-
quired.
Memory problems Phone memory full.
for, e.g. messages,
ring tones, pictures.
No WAP access. Profile not activated, profile
settings wrong/incomplete.
Questions & Answers
Possible solution
Move to higher location, to a window or an open
space.
Check coverage area of the service provider.
Contact the service provider.
(page 43).
Check barrings (page 43).
Try again later.
Reconnection to another service provider is automatic
(page 43). Switching the phone off and on may speed
this up.
'
Set first line (page 43).
Check for new restrictions.
Reset limit with PIN 2 (page 21).
Load credit.
Barrings may be set by your service provider. Check
barrings (page 43).
Delete entries in Addressbook or transfer to SIM card
(page 19).
Set call divert to the mailbox (page 41).
To free up capacity, delete or file messages (SMS).
Contact your service provider.
Delete files in the applicable areas.
Activate WAP profile (page 22), set (page 22). If nec-
essary ask your service provider.
47