Table of Contents
Advertisement
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "
appears on the display;
3. Press the selection arrow corresponding to "
TIME": The time setting panel appears on the display;
4. Adjust the time by pressing the selection arrows corre-
sponding to
(increase) or
hours (H) and minutes (MIN);
5. To confirm, press the selection arrow corresponding to " OK"
(to cancel, press the selection arrow corresponding to "
ESC") and press the selection arrow corresponding to "
ESC" to go back to the homepage.
The time is now set.
8.6 Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Please note!
To enable this function, the time must already be set correctly
(see section "8.5 Adjust time
To enable auto-start, proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "
appears on the display;
3.
Press the selection arrow corresponding to "
TO-START". Disable (or enable) the function by pressing
the selection arrow corresponding to
4.
Press the selection arrow corresponding to "
The time setting panel appears on the display (B1);
5. Adjust the time by pressing the selection arrows corre-
sponding to
(increase) or
hours (H) and minutes (MIN);
6. To confirm, press the selection arrow corresponding to "
OK";
7. Press the selection arrow corresponding to "
to go back to the homepage.
The auto-start time is now set and the corresponding symbol is
displayed to indicate that the function has been enabled.
Please note!
When the appliance is turned off using the main switch (A21),
the auto-start setting (if enabled) is lost.
8.7 Auto-off (standby)
Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1, 2 or 3 hours.
SET TIME"
(decrease) for the
").
AUTO-START"
AU-
(or
);
SET TIME".
(decrease) for the
ESC" twice
To programme Auto-off, proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
SET
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "
appears on the display;
3. Press the selection arrow corresponding to "
AUTO-OFF";
4. Select the required time interval by pressing the selec-
tion arrows corresponding to
(decrease);
5. To confirm, press the selection arrow corresponding to "
OK";
6. Press the selection arrow corresponding to "
back to the homepage.
Auto-off is now programmed.
8.8 Cup warmer
To warm the cups before making coffee, you can enable the cup
warmer (A6) and rest the cups on the shelf.
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " CUP WARMER"
"
appears on the display;
3. Press the selection arrow corresponding to "CUP WARMER"
to disable (
4. Press the selection arrow corresponding to "
back to the homepage.
8.9
Energy saving
Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable or enable "Energy Saving", proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " ENERGY SAVING"
appears on the display;
3. Press the selection arrow corresponding to "ENERGY SAV-
ING" to disable (
4. Press the selection arrow corresponding to "
back to the homepage.
The corresponding symbol appears on the display alongside the
time to indicate that the function has been enabled.
8.10 Coffee temperature
To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
12
(increase) or
) or enable (
) the function.
) or enable (
) the function.
"
AUTO-OFF"
ESC" to go
"
ESC" to go
"
ESC" to go
"
Advertisement
Table of Contents
Troubleshooting
