A phone number transmitted by the net-
work is displayed or the corresponding
name if it is contained in the Phonebook
(p. 14) or Addressbook (p. 15). A picture
may also appear (settings p. 15).
You can put the phone aside during a call.
You can then hear the caller via the
Activate handsfree function with
and switch on with
Adjust the volume with
switches off "handsfree talking".
Always switch off "handsfree talking" before
holding the phone to your ear! This will avoid
damage to your hearing!
Swapping between 2 calls
Make a new connection during a call with
swap back and forth between both calls.
If you are called during a phone call and
you can hear the "call waiting tone"
(p. 23), you can accept the waiting call
,putting the current call on
hold to do so.
Swap back and forth between the calls
see above or end the current call with
and accept the new call with
Call up to 5 parties and link them togeth-
er in a conference call. Make a new con-
nection during a call with
(dial a new phone number). The
(dial a new phone
current call is set on hold. With
when the connection is established.
Repeat this procedure until all partici-
pants are linked together.
All calls in the conference are ended si-
multaneously when the End key
If this is active, only one number can be
phone code (4- to 8-digits) is set by you
and entered at the first security setting.
Please note this code down (see also p. 9)!
Confirm code input with
select phone number from the Adress-
book p. 15 or Phonebook p. 14). Confirm
To dial, press and hold the right soft key.
To switch direct call off, press and hold .
Enter phone code and confirm with
Text entry without T9
Press number key repeatedly until the re-
quired letter appears. After a brief interval
the cursor will advance. Example:
you can join the held call
and enter phone code. The
and enter number (press
Press once briefly to type the let-
ter a, twice to type b, etc. Press
and hold to write the number.
Umlauts and numbers are dis-
played after the relevant letters.