Voice Command - Siemens AX75 User Manual

30 Extras
Countdown
¢ ¢
Countdown
§Menu§
A set time elapses. The last 3 seconds are
indicated by a beep. At the end a special
beep sounds.
Set period of time.
§Set§
Start counter.
§Start§
Interrupt counter.
§Stop§
Change period of time.
§Change§
Reset counter to starting time.
§Reset§

Voice command

¢ ¢
Voice command
§Menu§
Functions can be started by a voice com-
mand. Up to 20 voice recordings can be
saved in the phone for voice dialling or
voice commands (not on SIM card!).
Record
¢ ¢
Voice command
§Menu§
A list with the functions available is dis-
G
played. Select function. Press
Confirm selected function with
to start recording.
§Start§
A short signal sounds. Now say the com-
mand corresponding to the function and
repeat it when prompted.
Apply
E
Press and hold
A short signal (beep) sounds and a
prompt appears in the display.
Now say the function. Noisy environ-
ments may affect voice recognition.
§Record§
. Press
§Yes§
(in standby mode).
Camera (Accessories)
You can use the phone to immediately
view, save and send photos by MMS that
you have taken with the "QuickPic" cam-
era. A flashlight is integrated into the
camera.
Pictures can be taken in two different
formats:
• Low resolution:
QQVGA 160x120 pixels, memory size
up to 6KB for sending as an MMS image
(p. 31, p. 18).
• High resolution: VGA 640x480 pixels,
memory size of one picture up to 40 KB
– e. g. for further editing on PC. To al-
low the picture to be viewed on
the phone display, a QQVGA picture is
created for every VGA picture.
Press
§Camera§
¢
§Menu§
First the number of shots still available is
shown (depends on resolution chosen).
.
Confirm with
The last picture taken is shown. Scroll
through photos with
Picture
Press . You will hear an advisory tone
§Take§
when the exposure time has expired.
A shot (especially in high resolution) re-
quires a few seconds to be processed.
The photo is shown on the display and
saved automatically.
(in standby mode) or:
¢
Camera
.
§OK§
G
.