Table of Contents
Advertisement
The anti-tip brackets prevent the wine
storage unit from tipping.
The anti-tip brackets are also used to fix
the installation niche securely to the
surrounding walls.
Use 2 anti-tip brackets for each in-
dividual wine storage unit or 4 anti-tip
brackets for each (side-by-side) com-
bination of 2 appliances.
Position the anti-tip brackets on
the left and right of the niche.
Depending on the subsequent adjust-
ment of the feet, the anti-tip brackets
are positioned 84"-85 3/16" (2,134–
2,164 mm) from the floor of the niche.
Danger of injury and damage to
the appliance due to the wine stor-
age unit tipping over.
If the anti-tip brackets are fixed too
high up, they cannot be used to se-
cure the wine storage unit.
The distance between the
anti-tip brackets and the wine stor-
age unit must not exceed
5/16" (8 mm).
2
Make sure that the gap between the
wine storage unit's rear wall and the
installation niche does not exceed
2" (51 mm).
Place a wooden wedge behind the
anti-tip brackets if necessary.
While holding the anti-tip brackets in
place, mark the necessary drill holes
on the rear wall of the installation
niche.
Installation
2
2
29
Advertisement
Table of Contents
