Table of Contents
Advertisement
5.6
Boiler fixing
E9095
5.7
Burner assembly
CF Application
In case of CF applications, the burner shall not operate without
protection (A) of the suction inlet.
BF Application
The temperature of the incoming air must not
exceed 70 °C.
CAUTION
3055
Installation
1
Fig. 6
5
1
A
D5884
Fig. 8
12
Put on the flange 1)(Fig. 6) the screw and two nuts.
Fix the flange 1)(Fig. 7) to the boiler door 4) using screws 2)
and (if necessary) the nuts 3) interposing the insulating gas-
ket 5).
The seal between burner and boiler must be
airtight.
WARNING
4
2
For correct BF application, the burner must be in-
stalled on an appropriate BF boiler.
WARNING
In case of BF applications an optional snorkel and gasket are
available replacing (A) with (B).
This item can be supplied separately.
GB
3
E9094
B
D5883
Fig. 7
Fig. 9
Advertisement
Table of Contents
