·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning, and
warranty information -
consumer
.
ORDERING INFORMATION
AERODYNE 3/4.8L CLASS FIVE + 1 PC Toilet 305mm
.......... ...................................................................K-3869T
Includes
Toilet Seat
AERODYNE 3/4.8L CLASS FIVE + 1 PC Toilet 305mm
..........................................................................K-3869T-S
Includes
Quiet-Close Toilet Seat
AERODYNE 3/4.8L CLASS FIVE + 1 PC Toilet 400mm
......... ....................................................................K-4165T
Includes
Toilet Seat
AERODYNE 3/4.8L CLASS FIVE + 1 PC Toilet 400mm
..........................................................................K-4165T-S
Includes
Quiet-Close Toilet Seat
NOTES
·
Observe all local plumbing and building codes.
·
Shut off the water supply.
·
Seat post holes are on 140mm (5-1/2") centers.
·
51mm (2") passageway.
·
Water depth from the rim is 160mm.
·
Ensure that the new drain has the correct roughing-in
dimension. This toilet has a 305/400mm roughing-in
dimension.
See Fig. #1
·
The flexible hose must be no less than 450mm.
·
Closet flange must be 305
·
Carefully inspect the new fixture for any sign of damage.
·
For new construction, refer to the dimensions in
and Fig. #3
for locating the shut-off valve.
·
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2008).
WARNING: Risk of personal injury or product
damage
: Handle vitreous china products very carefully.
Vitreous china can break and chip if you overtighten
bolts and nuts.
WARNING: Risk of external leakage
nut has been factory-tightened to design specifications.
If re-tightening is required, wrench tighten one turn
past finger tight .
1195897-T01-C
please leave instructions for the
.............................................K-4169T
.........................K-4141T
.............................................K-4169T
.........................K-4141T
.
/400
mm on-center from wall.
. The fill valve
AERODYNE 3/4.8L CLASS FIVE +
VITREOUS CHINA SKIRTED TRAPWAY ONE-PIECE TOILET
·
·
·
3/4.8
...............................................................................K-3869T
3/4.8
...........................................................................K-3869T-S
3/4.8
...............................................................................K-4165T
3/4.8
...........................................................................K-4165T-S
·
·
·
·
51mm
·
·
305/400mm(
·
·
·
·
Fig. #1
·
·
2008.
-1-
3/4.8
INSTALLATION INSTRUCTIONS
S-TRAP 305mm K-3869T/K-3869T-S
S-TRAP 400mm K-4165T/K-4165T-S
305mm
........................K-4169T
305mm
.................K-4141T
400mm
........................K-4169T
400mm
.................K-4141T
140mm
160mm
1)
450mm
305
/400
mm
1
3
ASME
Copyright Kohler China Ltd., 2013
-
A112.19.2-
, 2013