Kohler Wellworth K-3423 Installation Instructions Manual

BEFORE YOU BEGIN
HOW TO USE THESE INSTRUCTIONS
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your partic-
ular installation. This will help you avoid costly mistakes.
In addition to proper installation, read all operating and
safety instructions.
ORDERING INFORMATION
Wellworth Toilet (elongated)
Wellworth Toilet (round front)
When specified:
3/8" supply . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Floor bolts (pair) . . . . . . . . . . . . . . . . . . . . . . . .
NOTES
S
Observe all local plumbing and building codes.
S
Shut off the water supply.
S
Seat post holes are on 5-1/2" centers.
S
2" passageway.
TOOLS AND MATERIALS REQUIRED
S
10" adjustable wrench
S
12" pipe wrench
S
Metal file (file cut)
S
Tape measure
S
Tubing cutter
S
Level
S
Hacksaw
BA
113786-2- (9521)
R
. . . . . . . . . . . . . . . K-3422
. . . . . . . . . . . . . . K-3423
K-7637
21401
SIPHON WASH TOILET
All information in these instructions is based upon the lat-
est product information available at the time of publica-
tion. Kohler Co. reserves the right to make changes in
product characteristics, packaging, or availability at any
time without notice.
These instructions contain important care, cleaning, and
warranty information – please leave instructions for the
consumer.
S
Water depth from the rim is 6".
S
Ensure that the new toilet has the correct
roughing-in dimension. The K-3422 and K-3423
have a 12" roughing-in dimension. See Fig. #1.
S
Be very careful while working with vitreous china
products. Vitreous china can break or chip if the
bolts and nuts are overtightened, or if carelessly
handled.
S
Carefully inspect the new fixture for any sign of
damage.
S
For new construction, refer to the dimensions in
Fig. #1 and Fig. #4 for locating the shut-off valve.
S
Fixture dimensions are nominal and conform to
tolerances established by ANSI Standards
(A112.19.2).
S
Putty knife
S
Screwdriver
S
Toilet gasket (wax seal)
S
Toilet T-bolts (2), 5/16" diameter
S
Toilet supply shut-off valve, 3/8" recommended
NOTICE: If the existing toilet does not have a supply
shut-off valve below the tank, install one before installing
the new toilet.
1 1
WELLWORTH
VITREOUS CHINA
Copyright E1995 Kohler Co.