Sony HDW-700A Operation Manual page 123

Updating the data
If data is already saved on the setup card, a message asking whether or
not that data is to be updated appears when the MIC/MENU knob is
pushed in step 5 of the procedure in the previous section (page 4-68).
The message is illustrated below.
To update the data, push the MIC/MENU knob.
Protecting saved data
If you set the WRITE PROTECT setting to "ON" to protect data written
to a setup card, then pushing the MIC/MENU knob in step 5 of the
procedure in the previous section (page 4-68), "WRITE PROTECTED!"
appears and the already saved data will not be overwritten.
<OPERATOR FILE>
m READ (CARDmCAM)
WRITE (CAMmCARD)
PRESET
PROTECT : OFF
: ππππππππππ
CARD ID
CAM CODE : HDW-700
DATE : 1998/JAN/01
OVER WRITE OK?
Chapter 4 Adjustments and Settings for Recording
4
4-69