Sony HDW-700A Operation Manual page 119

Inserting the setup card
Hold the setup card with the "SONY" logo facing you so you can read it,
slide it into the insertion slot, and close the lid.
4
Inserting the setup card
Note
Make sure that you can read the "SONY" logo when you insert the card.
If there is some resistance when you insert the card, the card might be
turned around or upside down. Do not force the card into the slot.
Check that the card is correctly oriented, and then try inserting it again.
Notice for using and storing the setup card
The following points apply to the use and storage of a setup card.
• Avoid high temperature and humidity.
• Make sure the card does not get dirty or wet.
• Avoid static electricity.
• Store the card by inserting it into the camcorder and closing the card
insertion lid.
4-65
Chapter 4 Adjustments and Settings for Recording