Part V
Parameter List
This section explains the parameters that actually can be transferred by the Instrument.
16
Using the Parameter List
• Parameter field
Shows the parameter name.
• ID field
Shows the parameter ID as a hexadecimal number.
• R/W field
Shows "R" to indicate that an IPR (Individual Parameter Request) read operation (Read) is
possible or "W" to indicate that an IPS (Individual Parameter Send) write operation is possible.
• Block field
Shows the bit field allocation of the block number. The bit field position is shown as a decimal
format number.
• Size field
Shows the parameter bit width as a decimal format value.
• Array field
Shows the parameter array size as a hexadecimal value.
• Min-Def-Max field
Shows the minimum value, default value, and maximum value for parameter acquisition as a
hexadecimal value.
• Description field
Explains the meaning of parameter values. Unless otherwise specified, setting values are all indi-
cated in decimal format.
Note: Operation is not guaranteed for values other than those noted here.
17
Tone Parameter
These parameters configure tone settings.
17.1
DSP Parameter
These parameters configure tone DSP settings.
Parameter ID
R/W
Block
Algorithm 004E R/W 55-0:0
Parameter 004F R/W
Size Array
Min-Def-Max
14
01
0000-0000-3FFF Algorithm Type
↑
7
20
00-40-7F
Description
0 - 127
32