Pan (0Ah); Expression (0Bh); General Use Controllers 1 Through 8 (10H Through 13H, 50H Through 53H) - Casio MZ-X300 Manual

Receive Receipt changes the mixer part volume.
7.6

Pan (0AH)

Message Format:
n:
vv:
Note1: For information about the relationship between setting values and send/receive values, see "26.5 Pan Setting Value
Table" in "VII Setting Values and Send/Receive Values".
Transmit Sent when the pan of any part is changed.
Receive Receipt changes the pan of the corresponding part.
7.7

Expression (0BH)

Message Format:
n:
vv:
Transmit Sent when Auto Acompanishment is used and during recorded song playback.
Receive Receipt changes the Expression value.
7.8 General Use Controllers 1 through 8 (10H through 13H, 50H through
53H)
On this Instrument, these messages are used to control DSP operation.
Message Format:
n:
vv:
Receive Receipt changes the value of DSP Parameter [1 to 8] (7-bit parameter) assigned to the part
specified by the MIDI Channel Number. Any message received that corresponds to the parameter of a
number not being used by the currently selected DSP is ignored. Use NRPN to change DSP parameters
from DSP Parameter [9] with a MIDI message. For details,see "7.25 NRPN". For details about each
DSP parameter, see "VI DSP Parameter List".
BnH 0AH vvH
MIDI Channel Number
Value(Note1)
BnH 0BH vvH
MIDI Channel Number
Value
BnH 10H vvH
BnH 11H vvH
BnH 12H vvH
BnH 13H vvH
BnH 50H vvH
BnH 51H vvH
BnH 52H vvH
BnH 53H vvH
MIDI Channel Number
Value
DSP Parameter[1]
DSP Parameter[2]
DSP Parameter[3]
DSP Parameter[4]
DSP Parameter[5]
DSP Parameter[6]
DSP Parameter[7]
DSP Parameter[8]
10