Rpn (64H,65H) - Casio MZ-X300 Manual

Parameter MSB
Layer On/Off 5XH
Octave Shift 5XH
Pitch LFO Depth 5XH
Filter LFO Depth 5XH
Amp Volume 5XH
Amp Pan 5XH
Amp LFO Depth 5XH
DSP On/Off 5XH
Note: X 0 through 5 correspond respectively to Layers 1 through 6.
Note1: For information about the relationship between setting values and send/receive values, see "26.2 Off/On Setting Value
Table" in "VII Setting Values and Send/Receive Values" of this document.
Note2: For information about the relationship between setting values and send/receive values, see "26.27 Octave Shift Setting
Value Table" in "VII Setting Values and Send/Receive Values" of this document.
Note3: For information about the relationship between setting values and send/receive values, see "26.5 Pan Setting Value
Table" in "VII Setting Values and Send/Receive Values" of this document.
Hex Layer Detune
Parameter MSB LSB
Detune 56H 00H
Note1: For information about the relationship between setting values and send/receive values, see "26.26 Hex Layer Detune
Setting Value Table" in "VII Setting Values and Send/Receive Values" of this document.
7.26

RPN (64H,65H)

Message Format:
n:
ll:
mm:
7.26.1 Pitch Bend Sensitivity
Message Format:
n:
mm:
ll:
Transmit Sent when Bend Range of any part is changed.
Receive Receipt changes Bend Range of the corresponding part.
LSB Notes
00H Note1
01H Note2
02H
03H
04H
05H Note3
06H
07H Note1
Notes
Note1
BnH 64H llH (LSB)
BnH 65H mmH (MSB)
MIDI Channel Number
LSB Value
MSB Value
BnH 64H 00H
BnH 65H 00H
BnH 06H mmH
BnH 26H llH
MIDI Channel Number
MSB Value(00H - 18H)
LSB Value(Transmit:00H, Receive:Ignored)
17